Electronics

The full featured, 8 function, hard-wire, G-Scale decoder is tough enough to provide power for large engines, yet capable of creeping at ultra-slow speed due to the excellent TCS auto-adjusting BEMF. The G8 will have your locomotive running like the...

1" wide x 36 yd. roll of Kapton tape.

The IMFP4 is a N-scale drop-in decoder which is designed for InterMountain FPA-unit locomotives. Examples include the following: InterMountain: FP7A FP9A See the installation pages for a full list of compatible engines! NOTE: This version of the...

The IMFTA4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTA locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The IMFTB4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTB locomotive.   Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 180 degrees from the standard orientation. This allows the decoder to fit better in certain applications...

This M4 decoder (see M4 for more information) comes connected to a 5" (12.7 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 90 degrees from the standard orientation. This allows the decoder to accommodate the UK's narrow gauge...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires to...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® for uninterrupted performance over...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed with High Profile Pins to receive a Soundraxx or ESU Decoder and provides an onboard Keep Alive® for...

This motherboard is designed to replace the existing circuit board in a Bachmann Light 4-8-2 (short tender) or the 2-8-0. This board provides an onboard Keep Alive® for uninterrupted performance over troublesome tracks. NOTE: This product does...

This board is designed with High Profile Pins to Receive a Soundtraxx or ESU decoder and provides an onboard Keep Alive® (KA4 style) for uninterrupted performance over troublesome tracks. This motherboard includes a rear LED light and onboard...

This motherboard is designed to replace the existing circuit board in a Bachmann Heavy 4-8-2. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® (KA2 style) for uninterrupted performance over...

This motherboard is designed to replace the existing circuit board in a Bachmann Heavy 4-8-2. This board is designed with High Profile Pins to Receive a Soundtraxx or ESU decoder and provides an onboard Keep Alive® (KA4 style) for...

This motherboard is designed to replace the existing circuit board in a Bachmann Baldwin J-Class 2-8-2. This board is designed to receive a WOW121 or EU821 decoder and provides an onboard Keep Alive® (KA4 style) for uninterrupted...