Electronics

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: ALCO PA-1 E5A E6A E8A E9A See the Installation Pages for a full list of compatible engines! Note: The K0D8 line of decoders are available...

The T4 is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The on-board resistors on this decoder allow for LED installations without the need for external resistors for F0F,...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but...

This full featured 6 function BEMF decoder fits the following Atlas HO Scale engines: S1, S2, S3, and S4. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires to...

The K4D6 is a N-scale drop-in decoder specifically designed to fit the Kato N-Scale MP36PH locomotive. This decoder is also commonly paired with the K4-LK lighting kit for the MP36PH. Note: The K4D6 does not have the copper...

The LL8 is a 8-function direct-plug decoder designed specifically to meet the needs of LifeLike/Proto 2000 models. The LL8 can quickly be swapped for the existing DC board in your model, making the installation process fast and simple. The LL8 has a...

The K0D8-D is a N-scale drop-in decoder for Kato B-unit locomotives. Examples include the following: Kato: PB-1 F3B F7B E9B See the installation pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: F3A F7A See the installation pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with different lighting...

The IMFTB4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTB locomotive.   Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet...

The IMFTA4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTA locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The IMFP4 is a N-scale drop-in decoder which is designed for InterMountain FPA-unit locomotives. Examples include the following: InterMountain: FP7A FP9A See the installation pages for a full list of compatible engines! NOTE: This version of the...

The IMF4 is a N-scale drop-in decoder which is designed for InterMountain F-unit locomotives. Examples include the following: InterMountain: F3A/B F7A/B F9B See the installation pages for a full list of compatible engines! NOTE: This version of...

The IMD4 is a N-scale drop-in decoder which is designed for InterMountain locomotives. Examples include the following: InterMountain: SD40T-2 SD45T-2 SD45-2 See the installation pages for a full list of compatible engines! Back EMF Load...

The K3D3 is a N-scale drop-in decoder designed specifically to fit the Kato N-Scale NW2 locomotive. Note: This decoder is very fragile due to its thickness and physical design. Special caution should be taken when installing to ensure the PCB is...

The K2D4 is a N-scale drop-in decoder designed for Kato and Walthers locomotives. Examples include the following: Kato: RS2/RSC2 SD80/SD90MAC Walthers: RS2 GP18 See the installation pages for a full list of compatible engines! Note: The K2D4...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

The VO-1000 is a N-scale drop-in decoder which is specifically designed for the Atlas VO-1000 locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...